Common Notes for Commissioning of Cone Crusher

If there is something wrong with the cone crusher equipment in the actual operation process or the cone crusher machine needs normal maintenance, the operation for the machine need to be stopped to check and maintain the related machine. After the check for the cone crusher, the cone crusher can not be put into use immediately. The commissioning for the cone crusher is very necessary to ensure the success of the check and maintenance for the cone crusher to reduce the inappropriate faults of the machine. In this article, the experts of Henan Hongxing Mining Machinery will carefully analyze the common notes for the commissioning of the cone crusher.
The commissioning of cone crusher with empty load has the following requirements.
First, start or stop the machine according to the starting program. The respective interlock system shall comply with the technical requirements.
Second, the moving cone should rotate forward or reversely. 15 revolutions per minute should not be exceeded.
Third, there should be no impact or periodic noise for the gear of the cone.
Forth, the lubrication system should work normally. The oil pressure should be within the range of 0.5kg/cm2 to 1.5kg/cm2. The temperature of the return oil should not be more than 50℃. For the commissioning with load for the cone crusher, the temperature should not exceed 60℃.
Fifth, the running time for the normal operation should not be less than 2 hours. Generally, the time should achieve the indentifying requirements.
Sixth, the hydraulic adjustment device of the hydraulic device should be locked according to the operation program. Adjust the using requirements of the discharging port.
The commissioning with load for the cone crusher has the following requirements.
First, check the load for the commissioning with load for the cone crusher.
Second, during the load-commissioning for the cone crusher, make the cone crusher run continuously. The feeding amount should increase gradually.
Third, the installation for the feeding device should be correct. The ore should be distributed into the crushing cavity evenly.
We provide Professional technology, excellent product quality and intimate after-sales service when you purchase sand maker, Screw classifiers, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.